EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 95)

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 95
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
This menu displays the diagnosis at the time the Safety Monitor was deactivated.
For additional information, please refer to the <ASIMON> documentation.
9.6.4.3 ACTUAL CONFIG (Configuration for the external monitor)
Main menu || DIAGNOSIS || EXT MONITOR || VIEW CONFIG || MONITOR CONFIG ||
INT SAFETY MON
LAST DIAG CH1
CH1.: OFF
A COLOR
32 RED
33 GREY
34 YEL FL
....
HELP:
A DEVICE ADDRES
+ CHANGED
Complete: The complete diagnostic is read out.
DIAG INDEX: The diagnostic is shown as it was configured under the
"device_index_assignment" in ASIMON
Information!
If the diagnosis is read using DIAG INDEX, the device count begins at 0, otherwise at
32!
EXT MONITOR
LAST DIAGNOSIS
VIEW CONFIG