5 electrical connection, 6 commissioning, 1 switching to advanced display mode – EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits User Manual
Page 29: 7 setting the profibus-dp address 14, Electrical connection, Commissioning, Switching to advanced display mode, Setting the profibus-dp address 14
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Installation
Subject to reasonable modifications due to technical advances
Id.-No.: 103329
Issue date - 24.10.2008
EUCHNER GmbH + Co. KG
29
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen
Tel. +49/711/75 97-0 • Fax. +49/711/753316
5.5
Electrical Connection
5.6
Commissioning
5.6.1
Switching to advanced display mode
5.7
Setting the PROFIBUS-DP address 14
Information!
Electrical connections are described in section <Electrical connection>.
OK
ESC/Service
classical display
menu structure see additional page
LCD
1.12A
UNKNOWN SLAVE
LCD
PROFIBUS
QUICK SETUP
AS-I SAFETY
DIAGNOSIS
advanced display mode
LCD
PROFIBUS
OK
QUICK SETUP
ASI SAFETY
LCD
PROFIBUS ADDRESS
PROFIBUS STATUS
LCD
PROFIBUS ADDRESS
OLD ADDRESS 3
2x
↓
OK
NEW ADDRESS 000
LCD
PROFIBUS ADDRESS
OLD ADDRESS 3
NEW ADDRESS 000