EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 69)

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 69
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
9.3 PROFIBUS (main menu)
Main menu || PROFIBUS ||
This menu enables PROFIBUS configuration and diagnostics.
9.3.1 PROFIBUS ADRESSE (PROFIBUS Station Address)
Main menu || PROFIBUS || PROFIBUS ADDRESS ||
This function is used to set and change the PROFIBUS station address.
The number following "Old Address" shows the current station address. By se-
lecting "New Address", the address can be changed.
9.3.2 PROFIBUS STATUS
Main menu || PROFIBUS || PROFIBUS STATUS ||
The function PROFIBUS Status indicates if and how many connections are active
on each PROFIBUS channel.
PROFIBUS ADDRESS
PROFIBUS STATUS
PROFIBUS ADDRESS: setting of the PROFIBUS station address.
PROFIBUS STATUS: status of PROFIBUS connections.
PROFIBUS ADDRESS
OLD ADDRESS
099
NEW ADDRESS 003
PROFIBUS ADDRESS
PROFIBUS STATUS
PROFIBUS STATUS
DPV0: 1 CONN
DPV1: 0 CONN
DP/V0: number of active cyclic connections.
DP/V1: number of active acyclic connections.