Garland MODUKB10000150 INDUCTION BUILT-IN MODULE-LINE GRIDDLE & BRAISING PAN - Manual (Page 6)

Components and Features RTCSmp Built-In Module-Line Griddle & Braising Pan
6 Part # 4532414 Rev 2 (1/15/14)
2 Components and Features
2.1 Application
The unique RTCSmp Module-Line Griddle and Braising Pan units are specially engineered for cooking a large
variety of food throughout the day. These RTCSmp module griddles and braising pans offer numerous great
features including fast heat up time, uniform heat distribution, and precise temperature monitoring across the
entire cooking surface. The deep pan construction of the braising pans also allow for large scale production with
or without liquids. To guarantee the induction units’ reliability and performance, please observe all safety,
installation, and operation requirements mentioned in this manual.
2.2 Components and Features
Built with a robust construction, the RTCSmp Induction Module-Line Griddle or
Braising Pan is modular and powerful with the revolutionary RTCSmp-
Technology (Realtime Temperature Control System with Multi-Point sensing).
The RTCSmp Technology monitors the energy supply, the state of the induction
coil, power board, CPU, and the cooking zone in realtime. RTCSmp also limits the
energy supply during peak load and its special control eliminates interference
noises.
The module-line models include a number of components which allow for
optimal flexibility in designing an efficient kitchen. The unique features of each
component are outlined below. See also chapter 3 Dimensions and Technical
Specifications.
IMPORTANT: GREASE DRAWER / BUCKET
A suitable grease drawer or bucket must be custom built for the RTCSmp Induction Module-Line Griddle or
Braising Pan. Refer to section 4.3 Grease Chute and Grease Collector.
CAUTION
A suitable grease-collecting means must be in
place before operating appliance.
Induction Generator
(Griddle / Braising Pan):
Engineered specifically for modular kitchen designs. | All connections such as
the mains cable, operation cable, CAN/BUS cable, and sensor cable can be
connected externally through plug connections. | Closed aluminum housing
with an integrated cooling fan to keep electronics cool. | Integrated air guiding
system to direct exhaust air out of the housing.
Types:
(1x) IN/MO/GR 7000 or IN/MO/GR 10000