INFICON TM-400 Thin Film Deposition Monitor - Manual (Page 70)

10 - 4
IP
N 17
88
0
0 Re
v.
B
TM-350/400 Operating Manual
10.8 Instruction Summary
Table 10-2 is a list of valid instruction codes.
Table 10-1 Receive Codes
Receive Code Description
0 Message received O.K.
1 Invalid checksum.
2 Invalid instruction code.
3 Invalid message length.
4 Parameter(s) out of range.
5 Invalid message.
Table 10-2 Instruction Codes
Instruction Code Description
0 Remote activation
1 Send monitor configuration
2 Send a film's parameters
3 Receive a film's parameters
4 Send monitor status
5 Initiate automatic data logging of string values
6 Internal command
7 Internal command
8 Internal command
9 Internal command
10 Set active film number