INFICON PSG55x ATM to Medium Vacuum Gauge User Manual
Page 39
Advertising
tina60e1-a (2011-04)
39
Time t
Me
asu
reme
nt value
Off
On
Hysteresis
(10% of threshold)
Off
Setpoint
Measurement signal
(Pressure p)
Threshold value
The setpoints SP1 and SP2 are factory set to the lower
measurement range limit and therefore do not switch.
High Trip Point
If the pressure in the vacuum system is higher than the setpoint,
the corresponding LED (<SP1> or <SP2>) is lit solid and the
corresponding relay is closed.
Time t
Off
On
Off
Setpoint
M
easure
ment value
Measurement signal
(Pressure p)
Threshold value
Hysteresis
(10% of threshold)
Threshold value
Advertising