INFICON HPG400 ATM to High-Vacuum Gauge - Manual (Page 21)

tina31e1 (2004-05) HPG400 v1.om
21
Plug the Profibus (and sensor) cable connector into the gauge.
Profibus cable
Sensor cable
Lock the Profibus (and sensor) cable connector.
The gauge can now be operated via Profibus interface (
→ 33).
The optional 24 V power supply (
→ 43) allows RS232C operation of the HPG400
gauge with any suitable instrument or control device (e.g. PC).
The instrument or control device needs to be equipped with a software that sup-
ports the RS232C protocol of the gauge (
→ 28).
Mains connection
Mains voltage 90 … 250 VAC 50 … 60 Hz
Mains cable 1.8 meter
(Schuko DIN and U.S. connectors)
Output (operating voltage of gauge)
Voltage 21 … 27 VDC, set to 24 VDC
Current max. 1.5 A
Gauge connection
Connector D-Sub, 15 pins, female
24 V cable 5 m, black
Connection of the instrument or
control device
RS232C connection D-Sub, 9 pins, female
Cable 5 m, black, 3 conductors, shielded
3.2.3 Using the Optional
Power Supply
(With RS232C Line)
Technical data