INFICON HPG400 ATM to High-Vacuum Gauge - Manual (Page 4)

4
tina31e1 (2004-05) HPG400 v1.om
Contents
Product Identification 2
Validity 2
Intended Use 3
Functional Principle 3
Trademarks 3
1 Safety 6
1.1 Symbols Used 6
1.2 Personnel Qualifications 6
1.3 General Safety Instructions 7
1.4 Liability and Warranty 7
2 Technical Data 8
3 Installation 13
3.1 Vacuum Connection 13
3.1.1 Removing and Installing the Electronics Unit 15
3.2 Electrical Connection 16
3.2.1 Use With INFICON VGC4XX Vacuum Gauge Controller 16
3.2.2 Use With Other Controllers 17
3.2.2.1 Making a Sensor Cable 17
3.2.2.2 Making a DeviceNet Interface Cable (HPG400-SD) 19
3.2.2.3 Making a Profibus Interface Cable (HPG400-SP) 20
3.2.3 Using the Optional Power Supply (With RS232C Line) 21
4 Operation 23
4.1 Measuring Principle, Measuring Behavior 23
4.2 Operational Principle of the Gauge 25
4.3 Putting the Gauge Into Operation 26
4.4 Display (HPG400) 27
4.5 RS232C Interface 28
4.5.1 Description of the Functions 28
4.5.1.1 Output String (Transmit) 28
4.5.1.2 Input String (Receive) 30
4.6 DeviceNet Interface (HPG400-SD) 31
4.6.1 Description of the Functions 31
4.6.2 Operating Parameters 31
4.6.2.1 Operating Software 31
4.6.2.2 Node Address Setting 31
4.6.2.3 Data Rate Setting 32
4.6.3 Status Lights 32
4.7 Profibus Interface (HPG400-SP) 33
4.7.1 Description of the Functions 33
4.7.2 Operating Parameters 33
4.7.2.1 Operating Software 33
4.7.2.2 Node Address Setting 33
4.8 Switching Functions (HPG400-SD, HPG400-SP) 34
4.8.1 Setting the Switching Functions 34
5 Deinstallation 36