INFICON HPG400 ATM to High-Vacuum Gauge - Manual (Page 36)

36
tina31e1 (2004-05) HPG400 v1.om
5 Deinstallation
DANGER
Caution: contaminated parts
Contaminated parts can be detrimental to health and environment.
Before beginning to work, find out whether any parts are contaminated.
Adhere to the relevant regulations and take the necessary precautions
when handling contaminated parts.
Caution
Caution: vacuum component
Dirt and damages impair the function of the vacuum component.
When handling vacuum components, take appropriate measures to
ensure cleanliness and prevent damages.
Vent the vacuum system.
Before taking the gauge out of operation, make sure that this has
no adverse effect on the vacuum system.
Depending on the programming of the superset controller, faults
may occur or error messages may be triggered.
Follow the appropriate shut-down and starting procedures.
Take gauge out of operation.
Disconnect all cables from the gauge.
Remove gauge from the vacuum system and replace the protective lid.
The gauge is now deinstalled.
Procedure