JULABO LH 85 High Dynamic Temperature System - Manual (Page 40)

Menu functions
40
7.5. Internal / external control
ext. Pt100
The temperature system offers the possibility of internal
temperature control in the internal bath or external control directly
in an external system.
Setup for external control:
Connect a Pt100 sensor to the socket "EXT" of the Presto
®
temperature system, if necessary perform a calibration using the
"ATC Ext:" function (see page 57) and then securely fix the sensor
in the external system.
S xx.xx
ID 0
Setp: 120.00°C
IntAct 21.00°C
ExtAct: 20.00°C
Control: Intern

To swap internal to external control:
 Press the key
in operating state "OFF" to select the
control type.
 The DIALOG-DISPLAY (LCD) indicates the effective control
type in line 4
>Control: intern< or > Control: extern<
Setp: 120.00°C
IntAct 21.00°C
ExtAct: 20.00°C
Control: Extern

Int

S 120.00
E 20.00

 Press the start/stop key
.
Temperature indication:
 The DIALOG-DISPLAY (LCD)
simultaneously indicates both actual temperatures.
 The
VFD-Info-Display
indicates the actual temperature in line 1. In the header the
corresponding symbol >Int< or >Ext< is illuminated.
Press the key to swap the display.
 It is useful, to set line 3 to show the actual temperature
>E xx.xx°C< by pressing the key .
Caution:
Place the external sensor into the bath medium and securely fix the sensor.
8. Menu functions
 Press the MENU key
to enter the menu level.
 Use the up/down cursor keys
to select the desired
submenu and press enter .
 Press
escape to return to the previous menu level.