Preparations, Setup – JULABO HT30-M1 High Temperature Circulator User Manual
Page 22
Preparations
22
5. Preparations
5.1. Setup
HT30
CU
-
ESC
P
0
6 0
1 80
3 00
4 20
EXT
°C
High temperature circulator HT30 as well as
High temperature circulator HT30 with C.U. cooling unit:
as a desktop unit
• Place the circulator on an even surface on a pad made of
non-flammable material.
as a stand-mounted unit
• Place the unit in an vertical position.
• A wall distance of at least 15 cm must be maintained for
ventilation, allowing internal heat to be conducted away
from the unit.
JULABO Order-No.
9790100
C.U. cooling unit
M1 remote control electronics:
• The unit should be set up at a dry location.
• Place the unit in an upright position and do not obstruct
the ventilation Ambient temperatures above 40 °C result
in a failure of the unit.
• Do not set up the unit in the immediate vicinity of heat
sources and do not expose to sun light.