JULABO HT30-M1 High Temperature Circulator - Manual (Page 45)

HT30-M1
45
Example: hour.min 6:00 h
>hour.min 06:00
Day.Mon 15:11
Year 2000
Start yes
Starttime: 06:00
Date: 15:11
*** wait ***
acttime 02:32:56
• When selecting the parameter time, a new menu level is called up
for entry of the start time.
A flashing segment indicates that a start time needs to be entered.
hour.min
Start time
Day.Mon day and month
Year year
Set each entry with enter .
Start
no / yes
A flashing line indicates that the parameter „yes“ needs to be
entered.
Press the P-key to select the parameter and press enter
.
• The High Temperature Circulator switches to waiting mode and a
flashing line „wait“ appears on the DIALOG-DISPLAY (LCD). The
start time and actual time are permanently indicated on the display.
Setp. : xx.xx°C
IntAct: xx.xx°C
Prof. : x Stp: x
Remain: xx:xx:xx
Setp. : xx.xx°C
ExtAct: xx.xx°C
Prof. : x Stp: x
Remain: xx:xx:xx
Indication after starting the profile:
DIALOG-DISPLAY (LCD)
1st line: Setpoint of the programmer
2nd line: Actual temperature value
at internal control = IntAct: xxx.xx
at external control = ExtAct: xxx.xx
3rd line: Selected profile and the actual section
4th line: Remaining time of the actual section
MULTI-DISPLAY (LED)
If the circulator is operated through the integrated programmer the
MULTI-DISPLAY (LED) swaps between the two actual values
(internal and external)