JULABO HT30-M1 High Temperature Circulator - Manual (Page 40)

Menu functions
40
Warning:
For supervised or unsupervised operation with the AUTOSTART function, avoid any
hazardous situation to persons or property.
The High Temperature Circulator does no longer conform to N.A.M.U.R. recommendations.
Take care you fully observe the safety and warning functions of the programmable
controller.
STAND-BY
Stand-by input
External stand-by for emergency switch-off
(connector - see page 6)
Possible parameters:
no - stand-by input is ignored
yes - stand-by input is active
Language
There are two options for the language of the DIALOG-DISPLAY (LCD):
German or English.
Possible parameters:
German (deutsch)
English (engl.)
Degasifying
During the filling process the pump fluidizes air bubbles into the
tempering liquid. In an automatic degasifying mode those and other light
solvent substances are let out via a breather tube.
Adjustable parameters:
off – Degasifying mode switched off
on – Degasifying mode switched on
(Also see page 29)