JULABO HT30-M1 High Temperature Circulator - Manual (Page 54)

Menu functions
54
8.7. Interface
Interface
>Type RS232
Baudrate 4800
Parity no
Handshake softw
Inputs/Outputs
Limits
>Interface
Temp.Sensor
The interface parameters are set by selecting the submenu „Interface“
on the programmable controller. Normally, this is a one-time-only
adjustment.
• Press enter
to select the submenu „Interface“.
• Select the desired option with the up/down cursor keys
.
Enter the desired value for the flashing digit.
Type
RS232 / RS485
Baudrate 2400/4800/9600
Parity none/even/odd
Handshake software handshake/hardware handshake
Address
0 to 127
• Press the P-key
to select the desired parameter and set with
enter
.
• Return to the previous menu level with escape
.
Factory settings
see - 11.1.
8.8. Sensors
Sensors
>ATC Int: 0.00K
ATC Ext: 0.00K
Inputs/Outputs
Limits
Interface
>Temp.Sensor
ATC - Absolute Temperature Calibration
• Select the submenu „Temp.Sensor“ with enter
.
• Select the desired option with the up/down cursor keys
.
A flashing digit indicates that a value needs to be entered i.e. set.
ATC Int: internal sensor
ATC Ext:
external sensor
Maximum setting
±9.99 K
• Enter the desired compensating value and set this value by pressing
ENTER