JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 69)

69
6 Configuration
6.8 Binary linkings
A maximum of four unrelated links with up to four signals each (digital selector) can be config-
ured. The signals within a link are linked with OR.
Use the "Copy" button to transfer the selected link to another link and to then make changes
there as desired.
The result of a link is available in the digital selector.
Setup dialog
Parameters
Status after change of configuration
The results of the links are available immediately, according to their configuration.
Behavior after power on
After initialization, the results of the links are available immediately, according to their configu-
ration.
Parameter Selection/settings Description
Signal 1 Digital selector (Inactive) First signal for the link
Signal 2 Digital selector (Inactive) Second signal for the link
Signal 3 Digital selector (Inactive) Third signal for the link
Signal 4 Digital selector (Inactive) Fourth signal for the link