Leica Biosystems SM2500 - Manual (Page 22)

5.3 Overview control panel - by functional areas
5. Operation
(41) Rotational speed of miller (RPM)
(40, 39) to set rotational
speed of miller
(33/34) Lamp On/Off
(37/38) Miller rotation On/Off
(35/36) Vacuum cleaner
On/Off
Area 3 - includes the controls for the supplementary instruments
and accessories that can be attached to the Leica SM 2500,
(ultramilling attachment, vacuum cleaner, lamp).
Area 4 contains two displays:
-Section counter (total number of
sections / milling strokes)
-Section thickness totalizer (total
thickness of sections / milling strokes)
Contains two reset buttons,
one for each display.
Area 5.1 contains all display elements and
control buttons for manual
movement of knife / miller
(operational in manual mode of
operation ‘MAN’).
Area 5.2 -
contains the display and
control elements for
manual movement of the
specimen (in manual mode
of operation ‘MAN’) and
for limiting the sectioning
/ milling stroke length
(‘Sectioning window’).
(44) Section / milling stroke
counter
(43) Reset for counter (45)
(45/46) Section thickness /
milling stroke
thickness totalizer
(48) - Knife/miller fast upwards
(47) - LED
(52) - LED
(49) - Knife/miller slow upwards
(50) - Knife/miller slow downwards
(51) - Knife/miller fast downwards
(55) - LED
(53) - LED
(54) - LED
(60) - LED
(61/62) - Sectioning / milling
stroke limit
(56)
(57)
(58)
(59)
(56 - 59) - Manual sledge
movement
(forward/backward
/ fast / slow)
(40) (39)
Fig. 11
Fig. 12
(42) Reset for counter (44)
22 Instruction manual V 1.3 – 10/2007