Leica Biosystems SM2500 - Manual (Page 36)

36 Instruction manual V 1.3 – 10/2007
5.4.13 Area 5.1 - Manual movement of knife / miller
47 UP (LED)
Flashing during fast upward movement of the knife / miller.
LED stays lit as soon as the upper end position has been reached.
48 Knife / miller fast upwards (button)
Press button (48) for fast upward movement of the knife / miller:
The knife / miller will keep moving upwards until reaching the upper limit
stop or until button (48) is pressed once again.
49 Knife / miller slow upwards (button)
Press button (49) for slow upward movement of the knife / miller.
Knife / miller will move upwards only as long as button (49) is held.
50 Knife / miller slow downwards (button)
Press button (50) for slow downward movement of the knife / miller.
Knife / miller will move downwards only as long as button (50) is held.
51 Knife / miller fast downwards (button)
Press button (51) for fast downward movement of the knife / miller.
Knife / miller will move downwards only as long as button (51) is held.
52 DOWN (LED)
Starts emitting light, when knife / miller has reached the lower limit stop
position.
47
48
49
50
51
52
5. Operation
Fig. 28