10 area 2.6 - start / stop sectioning / milling, Operation – Leica Biosystems SM2500 User Manual
Page 33
5.4.10 Area 2.6 - Start / stop sectioning / milling
29 RUN STOP (button)
30 RUN ENABLE (button)
31 RUN (LED)
32 STOP (LED)
Press RUN STOP and RUN ENABLE simultaneously:
-
sectioning / milling is activated.
LED RUN will be emitting light while sectioning / milling is in
progress.
Press either RUN STOP or RUN ENABLE:
-
sectioning / milling movement is stopped.
LED STOP will start emitting light, once sectioning / milling has
stopped.
After you have pressed RUN STOP or RUN ENABLE or the foot
switch, the instrument will complete the sectioning/milling stroke
in progress before stopping in the stop (or photo) position se-
lected.
Instead of using the RUN STOP / RUN ENABLE buttons, sectioning /
milling may be started / stopped as well via the foot switch (see
chapter 5.4.1 ‘Foot switch’).
29
30
31
32
5.
Operation
Fig. 24
or
Stop:
+
Start:
33
Leica SM2500