Lenze PROFIBU PC-based Automation - Manual (Page 26)

Control technology | PROFIBUS communication manual
Commissioning of PROFIBUS
Detailed commissioning steps
26
L
DMS 2.2 EN 07/2011 TD17
6.2.6 Configuration in the »PLC Designer«
The »PLC Designer« serves to map the field device topology in the control configuration.

Tip!
The »PLC Designer« serves to configure PROFIBUS stations and nodes on other
fieldbus systems.

CANopen with PROFIBUS
( 37)
6.2.6.1 Creating a PLC program

How to create a PLC program in the »PLC Designer«:
1. Create a new »PLC Designer« project:
• Menu command: FileNew
2. Select the suitable target system from the Target Settings dialog box:
The target systems of release 2.2/2.3 (L-force Logic x700) can also be used for
device series EL x8xx, CS x8xx, and CPC x8xx.
3. Confirm the configuration of the target system setting by clicking the OK button.
Target system Use with IPC series
EL x8xx CS x8xx CPC x8xx EL 1xx PLC
L-force Logic x800 V8.xx.xx z z z -
L-force Logic EL1xx V1.xx - - - z