Lenze PROFIBU PC-based Automation - Manual (Page 33)

DMS 2.2 EN 07/2011 TD17
L
33
Control technology | PROFIBUS communication manual
Commissioning of PROFIBUS
Detailed commissioning steps
6.2.6.3 Configuring the PROFIBUS slave

How to configure the PROFIBUS slave:
1. Set DP parameters for the PROFIBUS slave:
• Enter the station address of the PROFIBUS slave here.
• A baud rate does not need to be set since the slave recognises the baud rate
automatically.
• The GSE file... button serves to open and inspect the device-related GSE file.