11 parameter reference, Parameter reference – Lenze PROFIBU PC-based Automation User Manual
Page 64
![background image](/manuals/565881/64/background.png)
Control technology | PROFIBUS communication manual
Parameter reference
64
L
DMS 2.2 EN 07/2011 TD17
11
Parameter reference
This chapter supplements the parameter list provided in the online documentation for the
industrial PC by the parameters of the MC-PBM communication card:
Parameters of the MC-PBM communication card in slot 1
Parameters of the MC-PBM communication card in slot 2
Tip!
For general information about parameters please see the online documentation
for the industrial PC.
Note!
• Several MC_PBM communication cards can be used per industrial PC. The
name of the card in the »WebConfig« is MC-PBM.
• Depending on the slot used, the code numbers differ by an offset of ’500’. To
obtain the code numbers for a communication card inserted in slot 2, an
offset of ’500’ must be added to the code numbers of a card inserted in slot 1.