Lenze DDS Function library Drive - Manual (Page 101)

Function library LenzeDrive.lib
Index
4−1
l
LenzeDrive.lib EN 1.7
4 Index
A
Absolute value generation (L_ABS), 2−4
Actual phase−angle integrator (L_PHDIFF), 2−41
Addition (L_ADD), 2−5
Additional setpoint, 2−78
Appendix, 3−1
Arithmetic (L_ARIT), 2−11
Arithmetic (L_ARITPH), 2−38
C
Changeover (L_ASW), 2−12
Code index (L_FUNCodeIndexConv), 2−54
Code table, 3−1
Comparison (L_CMP), 2−13
Control characteristic, 2−80
Conversion (L_CONVVV), 2−52
Conversion of a phase−angle signal (L_CONVPP), 2−51
Conversion of phase−angle to analog (L_CONVPA), 2−50
Curve function (L_CURVE), 2−17
D
data−type entry, Explanation of, 1−4
Dead band (L_DB), 2−20
Delay (L_DIGDEL), 2−30
Delay (L_PT1_), 2−23
Differentiation (L_DT1_), 2−21
Division (L_PHDIV), 2−42
E
Edge evaluation (L_TRANS), 2−36
F
Fault trigger (L_FWM), 2−68
Flipflop (FLIP), 2−33
Function blocks
Absolute value generation (L_ABS), 2−4
Addition (L_ADD), 2−5
Addition (L_PHADD), 2−39
Arithmetic (L_ARIT), 2−11
Arithmetic (L_ARITPH), 2−38
Changeover (L_ASW), 2−12
Comparison (L_CMP), 2−13
Comparison (L_PHCMP), 2−40
Conversion (L_CONVVV), 2−52
conversion of a phase−angle signal (L_CONVPP), 2−51
Conversion of phase−angle to analog (L_CONVPA), 2−50
Curve function (L_CURVE), 2−17
Dead band (L_DB), 2−20
Delay (L_DIGDEL), 2−30
Delay (L_PT1_), 2−23
Difference (L_PHDIFF), 2−41
Differentiation (L_DT1_), 2−21
Division (L_PHDIV), 2−42
Edge evaluation (L_TRANS), 2−36
fault trigger (L_FWM), 2−68
Flipflop (L_FLIP), 2−33
Input gain and offset (L_AIN), 2−6
Integration (L_PHINT), 2−43
Integration (L_PHINTK), 2−45
Inversion (L_ANEG), 2−8
L_ByteArrayToDint, 2−54
L_DintToByteArray, 2−54
L_FUNCodeIndexConv, 2−54
L_ParRead, 2−55
L_ParWrite, 2−59
Limiting (L_LIM), 2−22
Logical AND (L_AND), 2−29
Logical NOT (L_NOT), 2−34
Logical OR (L_OR), 2−35
Motor potentiometer (L_MPOT), 2−70
Normalization (L_CONV), 2−49
Normalization with limiting (L_CONVX), 2−53
Output gain and offset (L_AOUT), 2−9
process controller (L_PCTRL), dancer position, tension, pressure
controller, 2−79
Programming fixed setpoints (L_FIXSET), 2−2
Ramp generator (L_RFG), 2−24
Right/Left/Quickstop (L_RLQ), 2−83
S−ramp generator (L_SRFG), 2−27
Sample & Hold (L_SH), 2−26
Speed preconditioning (L_NSET), 2−73
Transparent mode with EMZ9371BB/BC (L_Display9371BB),
2−63
Up/down counter (L_FCNT), 2−32