Lenze Drive Server Bus server S7 getting started - Manual (Page 13)

Busserver S7
L
74 Busserver S7 DE/EN 1.0
4 Software configuration
4.1 Interface module configuration
If you want to use ”MPI Simatic”, ”PROFIBUS-DP” or ”SOFTNET TCP/H1” as communication channel,
the corresponding interface module must be configured in order to enable communication between the
bus server and the PLC(s).
The communication parameters for all other communication channels are directly selected in the bus
server configuration tool!
Note!
The configuration program for the interface module is included in the Siemens communication drivers
which are automatically installed when installing the STEP 7 configuration software or a number of
other Siemens software products.
The configuration program is available in the Windows control panel:
1. Select
Settings W Control panel.
2. Double-click the symbol Set PG/PC interface to open the Set PG/PC interface dialog box:
3. Configure the interface according to your system environment and confirm the settings by
clicking OK.
Show/Hide Bookmarks