Lenze Drive Server Bus server S7 getting started - Manual (Page 19)

Busserver S7
L
80 Busserver S7 DE/EN 1.0
4.2.6 Manual addition of drives
As an alternative to using the scan function, you can add the drives manually to the configuration.
1. Select the PLC to which you want to add a device from the tree structure.
2. Click
Add device.
3. Use the Name input field to enter a name for the device and confirm with OK.
– The name of the new device may only contain letters. It must not contain any special
characters.
The device will be added with the entered name as a configuration entry to the tree structure, and you
can now configure its parameters in the text fields on the right.
4.2.7 Drive parameters
Parameter name Meaning
DP Address of the Device PROFIBUS address
Timeout Maximum time in [s] the bus server will wait for the processing of a
parameter command.
• When the parameter sets are transferred, many commands are
simultaneously transmitted. Depending on the cycle time of the CPU,
waiting times between 20 - 30 s may therefore occur.
• If problems occur during parameter set transfer, try a higher timeout
setting first.
Show/Hide Bookmarks