Lenze Drive Server Bus server S7 getting started - Manual (Page 27)

Busserver S7
L
88 Busserver S7 DE/EN 1.0
5.4 Creating new projects
Tip!
The following description is based on Version 5.0 of STEP7. The dialog boxes used in other STEP7
versions may be slightly different.
Select File W Assistant ’New Project’ in the SIMATIC Manager to be guided through project creation.
Please note:
• Select your hardware.
– In our example, a SIMATIC 300 with CPU 315-2 DP is used.
• Blocks need not be added yet.
• We recommend to use the IL language for all blocks.
Once the required information has been entered, the assistant creates a project structure similar to the
one shown below:
The next step is to configure the MPI and the PROFIBUS interface for the project. More details about
this can be found in the next chapter.
Show/Hide Bookmarks