4 remote maintenance via modem, Remote maintenance via modem, Busserver s7 – Lenze Drive Server Bus server S7 getting started User Manual
Page 47
![background image](/manuals/566082/47/background.png)
Busserver S7
L
108
Busserver S7 DE/EN 1.0
6.4
Remote maintenance via modem
Siemens offers a TS adapter which can be used for remote maintenance. This adapter is connected
between the MPI connection of the PLC and a commercial modem. The programming device which is
also equipped with a modem can now communicate with the PLC via a standard telephone connection.
Instead of using the programming device to carry out the remote maintenance, you can also use the
bus server installed at a PC equipped with a modem.
Modem connection
TS adapter
PLC
MPI
PROFIBUS DP
In addition to the TS adapter for the PLC, the following software components are required for the PC
to carry out remote maintenance via a modem:
•
Siemens TeleService software
•
Siemens STEP7
Tip!
•
The connection with the remote maintenance system always has to be established manually.
•
The bus server may only be started after the connection has been established, otherwise
communication is not possible.
Show/Hide Bookmarks