Lenze SO30 8400 protec - Manual (Page 16)

Safety option 10
Status display
3
l
16 EDS84DPSO01 EN 2.1
3.2 Status display
The operating status of the "STO" safety function is displayed using an LED on the front of
the controller.
E84DPSO06 SO10
Fig. 3−2 Position of the LED for the drive−based safety on the device
Pos. Colour State Description
S−Enable yellow
on Controller is enabled
blinking Safety function is active (non−safe display)
The status of safety option 10 is solely shown via the "S−Enable" display. All other displays have no function.