MacDon A40-D Pull-Type - Manual (Page 110)

SECTION 7 MAINTENANCE AND SERVICING
169000
108
Revision F
II. A40-D HEADERS
REEL SHAFT BEARING (1 PLC)
KNIFE DRIVE BEARING (1 PLC)
AUGER SHAFT BEARING (1 PLC)
A40-D HEADER RH SIDE
NOTE
To prevent binding and/or
excessive wear caused by knife
pressing on guards, do NOT
over-grease. If more than 6 to 8
pumps of grease gun are required
to fill the cavity, replace the seal in
the knife head.
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
KNIFE HEAD BEARING (1 PLC)