MacDon A40-D Pull-Type - Manual (Page 20)

SECTION 2 SAFETY
169000
18
Revision F
11. MD #184372
a. General hazard pertaining to machine
operation and servicing.
b. CAUTION
To avoid injury or death from improper or unsafe
machine operation:
• Read the operator’s manual, and follow
all safety instructions. If you do not have
a manual, obtain one from your dealer.
• Do not allow untrained persons to
operate the machine.
• Review safety instructions with all
operators annually.
• Ensure that all safety signs are installed
and legible.
• Make certain everyone is clear of
machine before starting engine, and
during operation.
• Keep riders off the machine.
• Keep all shields in place, and stay clear
of moving parts.
• Disengage header drive, put
transmission in neutral, and wait for all
movement to stop before leaving
operator’s position.
• Shut off engine and remove key from
ignition before servicing, adjusting,
lubricating, cleaning, or
unplugging machine.
• Engage locks to prevent lowering of
header or reel before servicing in the
raised position.
• Use slow moving vehicle emblem, and
flashing warning lights when operating
on roadways unless prohibited by law.
12. MD #184422
a. Keep shields in place hazard
b. WARNING
• To avoid injury, stop engine before
opening power drive system shield.
• Keep all shields in place.
13. MD #194464
a. Shut down for service
b. WARNING
• Remove key from ignition.
• Read tractor and mower manufacturer’s
manuals for inspection, and
maintenance instructions.
(continued next page)