MacDon A40-D Pull-Type - Manual (Page 21)

SECTION 2 SAFETY
169000
19
Revision F
14. MD #194521
a. Entanglement and general hazard
b. CAUTION
• To avoid injury from entanglement with
rotating auger, stand clear of header
while machine is running.
To avoid injury or death from improper or unsafe
machine operation:
• Read the operator’s manual, and follow
all safety instructions. If you do not have
a manual, obtain one from your dealer.
• Do not allow untrained persons to
operate the machine.
• Review safety instructions with all
operators annually.
• Ensure that all safety signs are installed
and legible.
• Make certain everyone is clear of
machine before starting engine, and
during operation.
• Keep riders off the machine.
• Keep all shields in place, and stay clear
of moving parts.
•
Disengage header drive, put
transmission in neutral, and wait for all
movement to stop before leaving
operator’s position.
• Shut off engine and remove key from
ignition before servicing, adjusting,
lubricating, cleaning, or
unplugging machine.
• Engage locks to prevent lowering of
header, or reel before servicing in the
raised position.
• Use slow moving vehicle emblem, and
flashing warning lights when operating
on roadways unless prohibited by law.