MacDon A40-D Pull-Type - Manual (Page 176)

SECTION 9 OPTIONS AND ATTACHMENTS
169000
174
Revision F
9 OPTIONS AND ATTACHMENTS
9.1 HYDRAULIC HEADER ANGLE
KITS: PULL-TYPE
This kit allows the header angle to be adjusted
hydraulically with a cylinder that replaces the
standard mechanical link. A separate hydraulic
circuit is required or the existing Articulating
Power Tongue (APT) steering cylinder hydraulic
circuit can be utilized, depending on the tractor
hydraulics. Installation instructions are included
with the kits.
9.2 ADDITIONAL SKID SHOES
In addition to standard two outer skid shoes, two
inner skid shoes may be added for extra control
of cutting height and protection of
cutting components.
9.3 GAUGE ROLLER KIT
The gauge roller kit replaces the outer skid
shoes, and consists of rollers in place of skid
shoes. They can be adjusted for varying
cutting height.
9.4 REPLACEMENT REEL BAT KITS:
A30-D
Consists of one complete bat assembly for ease
of replacement.
9.5 STUB GUARD CONVERSION KIT
Stub guards, complete with top guides and
adjuster plates are designed to cut tough crops.
Installation and adjustment instructions are
included with the kit.
9.6 TALL CROP DIVIDER KIT
Tall crop dividers attach to the ends of the
header for clean crop dividing and reel entry in
tall crops. The kit includes left and right dividers,
lean bar extensions and attachment hardware.