MacDon A40-D Pull-Type - Manual (Page 168)

SECTION 7 MAINTENANCE AND SERVICING
169000
166
Revision F
7.18.1.3 Maintenance Record: Self-Propelled
Self-Propelled Windrower Header
ACTION:  - Check  - Lubricate  - Change
MA
IN
TEN
ANC
E
RE
CO
RD
Hour Meter Reading
Date
Serviced By
BREAK-IN Refer To Section 7.18.1.1 Break-In Inspection: Self-Propelled
100 HOURS OR ANNUALLY

Conditioner Drive Gearbox Lube Level

Wheel Hub Bearings

Knife Drive Box Bolt Torque

Knife Drive Box Lubricant Level
END OF SEASON Refer To Section 6.19 STORAGE
10 HOURS OR DAILY
NOTE: A RECORD OF DAILY MAINTENANCE IS NOT
NORMALLY REQUIRED BUT IS AT THE
OWNER/OPERATOR’S DISCRETION.

Auger Drive Chain (except A40-D)

Hydraulic Hoses and Lines

Hydraulic Oil Level

Reel Drive Chain (except A40-D)

Sections, Guards and Hold-downs

Knife Assembly
 Knife Drive Box Bolt Torque -
First 10 Hours Only
25 HOURS

Knife Head
50 HOURS

Auger Drive Jackshaft Bearings (except A40-D)

Auger Shaft Bearings

Gauge Roller Bearings

Main Driveshaft Bearings

Tine Bar Bearings (A40-D)

Reel Shaft Bearings

Conditioner Gearbox Oil - First 50 Hours Only

Conditioner Universal Shafts

Roll Pivots

Conditioner Shaft Bearings

Knife Drive Cross-Shaft

Knife Drive Box Oil - First 50 Hours Only
1000 HOURS OR 3 YEARS

Conditioner Drive Gearbox Lubricant

Knife Drive Box Lubricant