Regency Energy E18 Small Gas Insert - Manual (Page 15)

Regency ® E18 Gas Fireplace Insert
15
INSTALLATION
22. Follow instructions in the manual for installation into a EP28-2 for exact
measurements for installation of the outside fi rebox to the surround.
Right side shown
Set to this
hole
Outside fi rebox shown in position - refer to
measurements (Step 22) before securing to surround.
19. ZC box and surround installed into framed opening.
20. Separate E18 inner and outer fi reboxes - see E18 installation manual
for details.
21. Set E18 outside fi rebox legs as shown below.
23. The top panel of the ZC surround may be removed to ease the in-
stallation of the venting - reinstall top panel after venting is installed.
* Extra venting may be required to get inside the ZC box. A 4" fl ex can
be used if required (not provided), if inside ZC shell.
 
PP
 
PP
 
PP
$
(3 )LUHER[
/HJ
24. Follow instructions in the E18 installation manual to complete the
install of inner fi rebox.
Follow Step 25 before installing faceplate.