Regency Energy E18 Small Gas Insert - Manual (Page 34)

34
Regency ® E18 Gas Fireplace Insert
INSTALLATION
MODIFICATION OF FIRESONG 120N
1. Turn off gas supply, if unit has a fan - turn off and disconnect power.
2. Remove Top Trim Pieces and Glass Doors- if installed (See
Diagram 1.1).
Diagram 1.1
Diagram 1.2
Diagram 1.3
Diagram 1.7
Diagram 1.4
Diagram 1.5
Diagram 1.6
3. Remove Lower Trim piece and Bottom Panel. (See Diagram 1.2).
4. Remove Top Rail securing Mesh. (See Diagram 1.3).
5. Shut off and disconnect gas line from valve.
6. Unscrew and Remove Trim Around Sand Pan (See Diagram
1.4).
7. Remove Logs (See Diagram 1.5).
8. Remove screw on right side to remove sand pan and base.
(See Diagram 1.6).
9. Remove Valve.
10. Make 2 vertical cuts on Top Facing. (See Diagram 1.7).