Regency Energy E18 Small Gas Insert - Manual (Page 24)

24
Regency ® E18 Gas Fireplace Insert
INSTALLATION
14. Cut the Sides of the Top of the Firebox Flush with the Sides of
the Firebox and Cut the Top of the Firebox 1” below the bot-
tom of the Exhaust Collar (See Diagram 7.11 and 7.12).
9. Remove Sand Pan and Pilot Assembly.
10. Cut out the Bottom of the Firebox (See Diagram 7.7)
Cut must be clean - with Max. 1/4" of material left.
11. Cut the Sides of the Top Face (See Diagram 7.8).
Diagram 7.6
Diagram 7.9
Diagram 7.10
Diagram 7.7
Diagram 7.8 Diagram 7.12
Diagram 7.11
12. Bend Top Face Down (See Diagram 7.9).
13. Measure and draw a line 1" the bottom of the exhaust collar
(See Diagram 7.10).