Regency Energy E18 Small Gas Insert - Manual (Page 51)

Regency ® E18 Gas Fireplace Insert
51
INSTALLATION
10. Install Log 3 by matching pin locator on Log 3 with right pin on Log
1 as shown below.
Right Log piece(4) positioned on glass
Installing Log 3
Log 5 in position
E18 fi nal install
Installed position of Log 3
1
3
2
4
11. Installed Log 3 should touch burner position in the location shown below.
* Measurement taken from left edge of burner tray - approximately 18".
1
5
2
1
2
3
4
18"
2
1
4
10"
13. Place lava embers/rocks on glass - ensure rocks do not block pilot.
Do not place lava rocks/embers too close to logs as this may cause
carboning.
14. Adjust aeration, see unit manual for setting.
15. Reverse Steps 2 and 1.