Regency Energy E18 Small Gas Insert - Manual (Page 45)

Regency ® E18 Gas Fireplace Insert
45
INSTALLATION
1. Centre back panel on the back wall of the fi rebox.
2. Slide in side panel into place in lower track.
3. Secure panel in position with panel clip - secure panel clip
with one screw (provided).
4. Repeat steps 2 & 3 on other side.
Panel Clip
Final Install
Black Enamel Panels
• Black Enamel panels must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time.
Claims for damage after installation will not receive consideration.
• Black Enamel panels will discolor a little during normal operation. This is normal and should not be considered a defect.
* All hand and fi nger marks MUST be cleaned off with a soft cloth. Use an ammonia based cleaner (ie. glass cleaner) to remove any fi n-
gerprints before applying heat to the unit.
Failure to do this will result in burn stains on panels which you will be unable to remove. Not protected by product warranty.
ENAMEL PANEL INSTALLATION