Rockwell Automation 22-SCM-232 Serial Converter Module - Manual (Page 20)

3-2 Configuring the Serial Converter Module
With DriveExplorer software, you can edit parameters in both the serial
converter module and the connected DSI-enabled drive. On PowerFlex
4/40 drives (or other DSI products), you can also edit parameters in any
of the attached peripherals. DriveExplorer Lite is shipped with the serial
converter module and is a free, limited-feature version of DriveExplorer.
Important: Parameter 1 - [Adapter Cfg] must be set to “Auto”
(default) for DriveExplorer to operate. HyperTerminal can
be used if Parameter 1 - [Adapter Cfg] needs to be
changed (see
Using Terminal Emulation Software section).
DriveExplorer Lite Quick Start
This section is designed to help you quickly start using DriveExplorer
Lite. If you are unsure how to complete a step, refer to the online help
(select Help > Help Topics) or the DriveExplorer Getting Results
Manual, Publication 9306-5.2, which is included on the CD.
1. Select Explore > Configure Communication. Select the
communications port and baud rate that you are using. Select either
checksum, and accept the default time for the time-out.
2. Select Explore > Connect > Local. A node will appear under Devices.
3. In the left pane, click the + signs to expand the tree. Click the product
or serial converter module to display parameters in the right pane.
Double-click a parameter to edit it.
Figure 3.1 DriveExplorer
Using DriveExplorer