Rockwell Automation 22-SCM-232 Serial Converter Module User Manual
Page 22
Advertising
3-4
Configuring the Serial Converter Module
Figure 3.3 Connection Dialog Box
4. In the Name window, type any name (for example, converter), and
then select any icon in the Icon box.
5. Click OK to display the Phone Number dialog box (see
Figure 3.4
).
Figure 3.4 Phone Number Dialog Box
6. In the Connect Using window, select the communications port that
you intend to use (usually Com1 or Com2).
7. Click OK to display the Properties dialog box.
8. Select the settings shown in
Figure 3.5
.
Important: If Parameter 03 - [DF1 Rate Cfg] was previously set
to 19.2K or 38.4K, select that value in the Bits per
second window.
Advertising