Rockwell Automation 22-SCM-232 Serial Converter Module - Manual (Page 24)

3-6 Configuring the Serial Converter Module
13. In the Emulation window, select VT100.
14. Click OK to display the HyperTerminal workspace.
15. Press the Enter key until the main menu appears (see Figure 3.7 ).
Figure 3.7 Main Menu
If no text or meaningless text appears instead of the Main Menu,
adjust the baud rate in your software. Refer to
Chapter 5 in the
Troubleshooting Potential Problems section for detailed instructions.
To navigate in the terminal emulation software
TIP: Select File > Save to save the HyperTerminal configuration that
you just created. In future connections, you can select the saved
configuration and quickly connect to the serial converter module.
What do you want to do? Page
Edit the serial port rate, or fault action 3-7 through 3-9
View the event queue 5-3
View DF1 data 5-5
Update the firmware C-1
Key Description
In the main menu, keys 1 – 3 select a menu option.
In the parameter screen, keys 0 – 9 enter a value.
Display the main menu or abort changes to a parameter.
Scroll through parameters or events.
Scroll through the values for a parameter.
Save a value for a parameter.
Main Menu - Enter Number for Selection
1> Display Setup Parameters
2> Display Event Queue
3> Flash Upgrade
0 9 .. .
Esc
OR
OR
Enter