Rockwell Automation 22A PowerFlex 4 User Manual FRN 6.xx - Manual (Page 43)

Programming and Parameters 3-7
Display Group (continued)
d018 [Elapsed Run Time]
Accumulated time drive is outputting power. Time is displayed in 10 hour increments.
Values Default Read Only
Min/Max: 0/9999 Hrs
Display: 1 = 10 Hrs
d019 [Testpoint Data] Related Parameter(s): A102
The present value of the function selected in A102 [Testpoint Sel].
Values Default Read Only
Min/Max: 0/FFFF
Display: 1 Hex
d020 [Analog In 0-10V]
Related Parameter(s): A110 , A111
The present value of the voltage at I/O Terminal 13 (100.0% = 10 volts).
Values Default Read Only
Min/Max: 0.0/100.0%
Display: 0.1%
d021 [Analog In 4-20mA] Related Parameter(s): A112 , A113
The present value of the current at I/O Terminal 15 (0.0% = 4mA, 100.0% = 20mA).
Values Default Read Only
Min/Max: 0.0/100.0%
Display: 0.1%
d024 [Drive Temp]
Present operating temperature of the drive power section.
Values Default Read Only
Min/Max: 0/120 degC
Display: 1 degC