Rockwell Automation 1771-OFE/B Analog Output Module User Manual - Manual (Page 35)

3-9
Publication 1771Ć6.5.30 - November 1998
Now that we have explained the purpose and function of each word
in the block transfer write block, you should be ready to enter
configuration data. Consult your programming manuals for the
proper techniques required to set up block transfer instructions with
your programmable controller. Refer to chapter 4 for example
programs.
Important: A block transfer write length of 0 will result in a default
length of 13. A block transfer read length of 0 will
result in a default length of 5.
In this chapter, you learned how to configure your module using a
block transfer write instruction.
Procedure for Configuring
Your Module
Chapter Summary