Rockwell Automation 1771-OFE/B Analog Output Module User Manual - Manual (Page 79)

Publication 1771Ć6.5.30 - November 1998
B
Block Length, Default, 4-10
Block Length, Setting, 4-10
Block Transfer
Boundary Word, 4-11
Multiple GET Instructions, B-1
Programming Formats, 4-1
Read, 4-2
Write, 4-2, 4-7, 4-8, 4-9
block transfer, 1-3
write, 1-3
block transfer read, 5-1
Buffering Data, 4-2, 4-7
C
cable requirements, 2-11
Calibration
Preparation, Current Version, 6-5, 6-9
Preparation, Voltage Version, 6-1
Resistor Pot Adjustment, 6-5
Resistor Pot Location, 6-4, 6-8
Tools, 6-1
Configuration
Plugs, 2-4
Scaling, 3-6
Word, 3-3
configuration plugs, 2-3
Connections
Extender Board, 6-2, 6-5
User Devices, 2-10
current output version, 2-3
D
Data Buffering, 4-2, 4-7
Data Formats
BCD, 3-4
Binary, 3-4
data formats
2's complement binary, C-3
4-digit binary coded decimal, C-1
signed-magnitude binary, C-2
Data Polarity, 4-10
data polarity, 3-3
Default Block Length, 4-10
Defaults, module, 3-4
Diagnostics, 4-2, 7-1
F
Fault Indicator LED, 2-12, 7-1
Features, 1-2
Field Wiring Arm, 2-10, 6-1, 6-6, 6-9
Formats, Block Transfer, 4-1
Formats, Data, 3-4
G
grounding, 2-11
I
installation, of module, 2-8
Installing the Module, 2-2
K
keying bands, 2-8
L
last state configuration plugs, 2-3
LED Indicators, 2-12, 7-1
M
Module Configuration, 3-1
Module Defaults, 3-4
module installation, 2-8
module location, 2-3
Module Troubleshooting, 7-2
Multiple GET Instructions, 4-1, B-1
O
Output Ranges, 1-2
Table of Contents