Rockwell Automation 1771-OFE/B Analog Output Module User Manual User Manual
Page 55
Advertising
6-3
Publication 1771Ć6.5.30 - November 1998
6. Connect the voltmeter leads across the top two screws on the field
wiring arm (Channel 1). The top screw is positive, and the
second (lower) screw is negative.
7. Turn on the processor, I/O chassis, and the industrial terminal.
Figure 6.1
Resistor Placement on Field Wiring Arm
A
0
1
2
3
4
5
6
7
8
Channel 1
Channel 2
Channel 3
Channel 4
Field Wiring Arm
1K or greater
resistors
12898
Figure 6.2
LAST STATE Configuration Jumpers
Front
of
Module
Printed Circuit Board
Top View
Mid
Max
Hold last state
Min
Position plugs as required.
LAST STATE
11918ĆI
Advertising