Rockwell Automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS PA Linking Device User Manual - Manual (Page 39)

Rockwell Automation Publication 1788-UM058B-EN-P - September 2014 39
Set Up in the Studio 5000 Logix Designer Application Chapter 2
Software
Media Redundancy
If the dual trunk redundancy is selected, you can view the PA Bus, and Channel A
and Channel B diagnostics (voltage, current, and so on) as shown in
Figure 6 .
Figure 6 - PA Bus and Channel A/B Diagnostics
IMPORTANT Choose the architecture that is used in the field before downloading the
configuration. If the incorrect architecture is chosen, the network will not
function correctly.