Rockwell Automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS PA Linking Device User Manual - Manual (Page 58)

58 Rockwell Automation Publication 1788-UM058B-EN-P - September 2014
Appendix A Linking Device Display Status
The lower portion of the main page shows the communication quality to each
field device represented as a percentage of data packets sent compared to data
packets received for each field device index (see
Table 8 ).
Table 8 - Field Device Communication Quality
PA Master Page The next page that is accessed by
the Page button is the PA Master
page.
Bus A/B: Displays the bus
voltages and currents.
Temperature: Displays the
internal temperature of the linking
device.
External Pwr: Displays the power
supply voltage.
PA Node: Displays the node
address of the linking device.
Bus A/B Enabled: PA Bus A and/or PA Bus B is enabled for communication.
Bus A/B Tripped: PA Bus A and/or PA Bus B has tripped indicating that there
was an over-current on either port.
Bus A/B Term: The linking device is configured to terminate PA Bus A and/or
PA Bus B.
Display Communication Quality
>>> 95+
>> 80+
> 70+
X 60+
XX 50+
XXX Below 50
??? Unknown