Rockwell Automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS PA Linking Device User Manual - Manual (Page 55)

Rockwell Automation Publication 1788-UM058B-EN-P - September 2014 55
Diagnostics Chapter 4
1. Click Advanced in the config tree.
2. Choose the DTM revision from the pull-down menu.
3. Click Open DTM.
4. Choose the device information that you want to view.
5. View the selected device information.
IMPORTANT If you are presented with multiple DTMs of the same device but with
different revisions, select the correct DTM and revision for the specific
field device.