Label the terminal block – Rockwell Automation 1746-FIO4V SLC 500 Fast Analog I/O/ User Manual User Manual
Page 21
Advertising
![background image](/manuals/579225/21/background.png)
Publication 1746-UM009B-EN-P - September 2007
Install and Wire the Modules 21
Label the Terminal Block
The terminal block has a write-on label. Use it to ensure that you
install the correct terminal block on the corresponding module.
Terminal Block
Note: The black dot on the label
indicates the position of terminal 0.
SLOT ____ RACK ____
MODULE _____
Advertising
This manual is related to the following products: