Rockwell Automation 1746-FIO4V SLC 500 Fast Analog I/O/ User Manual User Manual
Page 25
Advertising
Publication 1746-UM009B-EN-P - September 2007
Access Files to Configure I/O 25
2. Place the 1746-FIO4I/V module into the correct slot by clicking
Read IO Config.
The following screen appears.
3. Select either the driver and processor node number or use the
Who Active button to browse for the device.
• If you selected the driver and node number, proceed to step 5.
• If you clicked Who Active, the following screen appears.
Advertising
This manual is related to the following products: