Rockwell Automation 1756-OF8H ControlLogix HART Analog I/O Modules - Manual (Page 111)

Rockwell Automation Publication 1756-UM533C-EN-P - February 2011 111
Configure the Modules with RSLogix 5000 Software Chapter 7
HART Device Info Tab The HART Device Info tab displays information about the attached HART field
device that is collected by the HART module.
• If you selected a Listen-Only communication format when you created the
module, this tab is not available.
• If HART is not enabled for this channel, Channel Not HART Enabled is
displayed.
Enhanced diagnostic
and status codes are
available here
depending on your
configuration.